Robotics Sportster Flash x2 Provozní pokyny stáhnout pdf (Strana 50)

S13 0 Bit-mapped register. Select the bit(s) you want on and set S13 to the total of the values in

the Value column. For example, ATS13 = 17 enables bit 0 (value is 1) and bit 4 (value is

16).

Bit Value Result

0 1 Reset when DTR drops.

1 2 Reset non-MNP transmit buffer from 1.5K to 128 bytes.*

2 4 Set backspace key to delete.

3 8 On DTR signal, auto dial the number stored in NVRAM at

position 0.

4 16 At power on/reset, Auto Dial the number stored in NVRAM at

position 0.

5 32 Reserved.

6 64 Disable quick retrains.

7 128 Disconnect on escape code.

The 1.5K non-ARQ buffer allows data transfer with Xmodem- and Ymodem-type file transfer protocols

without using flow control.

The 128-byte option lets remote users with slower modems keep data you’re sending from scrolling off

their screens. When remote users send your computer an XOFF (Ctrl-S) and you stop transmitting, the

data in transit from your modem’s buffer doesn’t exceed the size of their screen.

This is also very helpful in situations when a remote modem/printer application is losing characters.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Žádné komentáře

Robotics Sportster Flash x2 Provozní pokyny Strana 50