Robotics Sportster Flash x2 Uživatelská příručka stáhnout pdf (Strana 14)

Sportster MessagePlus10

How to Hook Up the Modem

1. Turn off your computer and any attached devices, such as a

printer.

2. Connect the serial cable to the modem and to the computer.

When looking for the serial port label on the back of your

computer, look for ports labeled COM, MODEM, RS-232, or

SERIAL. DO NOT select AUX, GAME, LPT, or PARALLEL.

NOTE: Remember which serial port you selected. This

information will be necessary when installing your communications

software.

3. Plug the power adapter into the power jack on the modem and

into a standard wall outlet.

4. Plug one end of the phone cord into the telephone jack. It is

labeled with a wall plug icon on the bottom of the case. Plug the

other end into a phone wall jack.

WARNING: The phone jack you use must be for an

ANALOG phone line. Most office phones are wired through

DIGITAL lines. Be sure you know what type of line you have.

The modem will be damaged if you use a digital phone line.

5. If you wish to use your modem and phone through the same

phone wall jack, plug your phone's cord into the modem's phone

jack. It is labeled with a phone icon on the bottom of the case.

Use an adapter cable if necessary.

NOTE: You cannot use the modem and phone at the same time if

they are sharing a line.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 69 70

Žádné komentáře

Robotics Sportster Flash x2 Uživatelská příručka Strana 14